TinySA ULTRA Spectrum Analyzer 4-inch
New Handheld Tiny Spectrum Analyzer TinySA ULTRA 4" Display 100k Hz to 5.3GHz with 32GB Card Version V0.4.5.1 Specification： Parameter Specification Display size 4” TFT LCD (480×320) Max low input frequency 800MHz, 6GHz in Ultra mode Resolution filters in 1,3,10 steps from 200 Hz to 850k Hz Max output frequency Sinus up to 800MHz, Square wave up to 4.4GHz output level -104d Bm to -16d Bm Ultra mode Level calibrated up to 5.3GHz Internal LNA gain 20dB up to 4GHz Displayed points per scan max 450 0-350MHz scan time 165ms Shortest zero span time 17ms DANL at 100MHz -153d Bm/Hz (LNA Off) / -169d Bm/Hz (LNA On) DANL degrading in ultra mode 10dB above 2.5GHz, 25dB above 5.3GHz Phase noise at 10k Hz offset -92d Bc/Hz Phase noise at 100k Hz offset -110d Bc/Hz Input 1dB compression level +0.5d Bm (LNA Off) / -26.5d Bm (LNA On) IIP3 without LNA +18d Bm (at least 2MHz apart) / 0d Bm (500 Hz apart) IIP3 with LNA -8d Bm (at least 2MHz apart) Frequency stability <1ppm ( -10℃ ~ +55℃) SD card slot micro SD card Audio out 3.5mm headphone plug FW update mode activation Push jog button before switch on Maximum current consumption 330mA Maximum charging current 1300mA Battery Li-polymer 3.7V 3000m Ah RF connectors SMA female Communication Interface USB-CDC(Type-C)，UART-TTL(2.54mm Connector) Appearance Size 117x72x23mm (Excluding protruding parts) Package includes: Host (with 3000m Ah battery, 4"display) x 1USB Type-C data cable x130cm ALSR100 SMA cables x2SMA-SMA barrel connector x1 Antenna with SMA connector x1 Lanyard and touch plectrum x132GB MicroSD card(plugged in the host) x1